Tuesday, November 13, 2007

Use and tune Harley carburetor for smooth ride

Harley, the name is not new in the domain of automobile accessories and devices. The carburetor from Harley Davidson is exclusively meant for a smooth ride on your bike. The Harley carburetor has a long life provided you tune it from time to time. You won’t face any kind of hassle in driving your bike if the tuning is done properly.

The process of tuning for better performance

Don’t think you won’t be able to do it and dump your bike in a garage. It is nothing like that. Things are rather simple and you can yourself conduct the process of tuning the Harley carburetor. The tuning becomes important for the maintenance of the carburetor.

Well to begin with remove the Harley carburetor from the main body of the engine. You cannot just open and remove it as if opening your shirt. A particular technique has to be followed. The fuel has to be removed from the carburetor bowl and only then you can clean the thing. The backing plate and the bolts are to be removed in parts and the choke cable has to be also taken off.

The throttle cables are next put down. Therefore one by one the individual parts are disassembled. You need not entirely open the throttle cables. When the carburetor bowl is cleaned with the carburetor cleaner and you set down to reset the arrangement, adjust the throttle cables in the right location.

Resetting of the cables and reinstallation of the carburetor

The final round of tuning is the process of reassembling and fixing up the cables along with the clean carburetor bowl. The problem you face while riding a bike in simple terms is the heating up of the engine. And you fail to judge that the problem lies with the carburetor. Most of the times you even decide to change the whole unit of the carburetor.

Such changes are not required in Haley’s carburetor. Simple tuning brings it back to the original performance. While tuning there is a chance of misplacing a cable or it can also be so that you cannot fix the exact cables in the right place. It is always suggested to tag or mark the cables used in a Harley carburetor. This will create no fuss either at the times of removal or at the times of resetting.

The wiring system attached to the cables of the carburetor is to be handled with care. Don’t damage the fine metal wires or else you will have to replace them and get new ones fixed up. After tuning your bike or specifically the Harley carburetor, take a short trip and enjoy the difference. You won’t complain any more about the engine.

by Thomas MacIntosh

1 comment:

riderwear said...

Motorcycling has long been one of the most sought after recreational and leisure activities, as well as technological innovations to come every now and then, riding experience is improved day by day. Today we have the opportunity to add accessories to our many great motorcycle, so it's better in many ways. This is a motorcycle intercom, bluetooth helmets, bike panniers, Global Positioning System, and much more. All accessories to enhance the driving experience a lot and each round is worth writing home.
motorbike clothing